A William IV tilt-top breakfast table, rosewood veneer, circa…
click the photo to enlarge
A William IV tilt-top breakfast table, rosewood veneer, circa 1835, 73 cm high, 121 cm diameter

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • William Iv - William IV was King of the United Kingdom and King of Hanover from 26 June 1830 until his death in 1837, and in English furniture design it represented the brief period between the end of the Regency period, and the beginning of the Victorian period.
  • Circa - A Latin term meaning 'about', often used in the antique trade to give an approximate date for the piece, usually considered to be five years on either side of the circa year. Thus, circa 1900 means the piece was made about 1900, probably between 1895 and 1905. The expression is sometimes abbreviated to c.1900.
  • Veneers - Veneers are thin sheets of well-figured timber that are glued under pressure to the surface of a cheaper timber for decorative effect, and then used in the making of carcase furniture.

    Early veneers were saw-cut so were relatively thick, (up to 2 mm) but is was realised that saw cutting was wasteful, as timber to the equivilent of the thickness of the saw was lot on each cut.

    A more efficient method was devised to slice the timber, either horizontally with a knife, or in a rotary lathe.

    Flame veneer, commonly found in mahogany or cedar furniture, is cut from the junction of the branches and main trunk. So-called fiddleback veneers, where the grain is crossed by a series of pronounced darker lines, is usually cut from the outer sections of the tree trunk.

    During the 17th and 18th centuries, and in much of the walnut marquetry furniture made during the latter part of the 19th century, the veneer was laid in quarters, each of the same grain, so that one half of the surface was the mirror image of the other.

    The use of veneer allows many other decorative effects to be employed, including stringing, feather banding, cross banding, and inlaid decorative panels in the piece. The carcase over which veneer is laid is usually of cheaper timber such as pine, oak or, sometimes in Australia during the first half of the 19th century, red cedar.

    The important thing to remember about veneers is that prior to about 1850 they were cut by hand, and were consequently quite thick - ranging up to about 2mm deep.

    From the mid-19th century veneers were cut by machines and were almost wafer-thin. This is a critical point when trying to judge the approximate age of veneered furniture.
  • Rosewood - A dense timber that varies in shade to very light brown to almost black. When rosewood is cut and sanded the colour of the timber will turn black, and after polishing and exposure to daylight, the surface will gradually lighten over time to light brown with black streaks.

    The name comes from the odour emanating from the timber when it is planed, sanded or cut.

    Rosewood was very popular for use in Victorian furniture in the second half of the 19th century, and at that time most of the rosewood was imported from Brazil. However it also grows in India and Indonesia.

    It is used in the sold for chairs and table legs, but for carcase furniture such as side cabinets and bookcases, and for table tops it is always used as a veneer.

This item has been included into following indexes:

Visually similar items

A superb Anton Seuffert geometric pattern card table of various New Zealand inlaid timbers. The lower column carved by Anton Teutenberg in floral relief. Illustrated in Brian Peets, The Seuffert Legacy. Height 73 cm. Depth 61 cm. Provenance: Ruth Simon Est

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

An Italian marquetry inlaid walnut centre table, 20th century, 77 cm high, 96 cm diameter

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A William IV Australian cedar dining table, New South Wales origin most likely the work of Andrew Lenehan, 72 cm high, 122 cm diameter

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A single pedestal side table, 66 x 66 x 56 cm

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.