An American antique centre table, carved and veneered walnut,…
click the photo to enlarge
An American antique centre table, carved and veneered walnut, circa 1865, 73 cm high, 80 cm wide, 80 cm deep

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Circa - A Latin term meaning 'about', often used in the antique trade to give an approximate date for the piece, usually considered to be five years on either side of the circa year. Thus, circa 1900 means the piece was made about 1900, probably between 1895 and 1905. The expression is sometimes abbreviated to c.1900.
  • Veneers - Veneers are thin sheets of well-figured timber that are glued under pressure to the surface of a cheaper timber for decorative effect, and then used in the making of carcase furniture.

    Early veneers were saw-cut so were relatively thick, (up to 2 mm) but is was realised that saw cutting was wasteful, as timber to the equivilent of the thickness of the saw was lot on each cut.

    A more efficient method was devised to slice the timber, either horizontally with a knife, or in a rotary lathe.

    Flame veneer, commonly found in mahogany or cedar furniture, is cut from the junction of the branches and main trunk. So-called fiddleback veneers, where the grain is crossed by a series of pronounced darker lines, is usually cut from the outer sections of the tree trunk.

    During the 17th and 18th centuries, and in much of the walnut marquetry furniture made during the latter part of the 19th century, the veneer was laid in quarters, each of the same grain, so that one half of the surface was the mirror image of the other.

    The use of veneer allows many other decorative effects to be employed, including stringing, feather banding, cross banding, and inlaid decorative panels in the piece. The carcase over which veneer is laid is usually of cheaper timber such as pine, oak or, sometimes in Australia during the first half of the 19th century, red cedar.

    The important thing to remember about veneers is that prior to about 1850 they were cut by hand, and were consequently quite thick - ranging up to about 2mm deep.

    From the mid-19th century veneers were cut by machines and were almost wafer-thin. This is a critical point when trying to judge the approximate age of veneered furniture.

This item has been included into following indexes:

Visually similar items

Pair of hall chairs mid Victorian English, mahogany with, armorial carved backs, and spandrel carvings

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A Victorian carved rosewood fold-over card table, with birdcage base, 74.5 cm high, 97 cm wide, 49 cm deep

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A Victorian walnut fold-over games table, mid 19th century, with a beautifully figured serpentine top with baize lining above a shaped and embellished apron, the pedestal with a carved mushroom cup and four splayed cabriole legs with floral carved knees an

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A Victorian fold over burr walnut games or occasional table, 19th century, the serpentine table with delicate stringing and inlaid foliate detail, the pedestal with a carved knop and four splayed curvaceous legs with vegetal details in relief, whorl ends a

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.