George II/III oak dresser base with three deep drawers

• Loop Handles. - Throughout the Georgian period, a form of loop handle was used on drawer fronts, where the pull was attached to a solid or pierced brass backplate, frequently shaped and scalloped. Keyhole escutcheons were often made in similar design. Towards the end of the 18th century, the backplate was often oval in shape and impressed with a variety of beads and patterns. Smaller loop or ring handles were made, with the circular brass backplate complementing the ring pull
• Tapered Legs - found on both cabinet and country-made furniture from the 18th to the later 19th centuries. The leg sometimes terminates in a spade foot, though on most country furniture the taper continues for the whole length of the leg. The important thing to remember is that the taper ought only to be on the inside face of the leg, and the outer face should be straight and square. Some legs were made where both sides tapered, but in such a case the taper ought to be the same on both the inner and outer faces of the leg. Where the inside of a leg is straight, with only the outer face tapering, there is every reason to be suspicious
• Oak - Native to Europe and England, oak has been used for joinery, furniture and building since the beginning of the medieval civilisation. It is a pale yellow in colour when freshly cut and darkens with age to a mid brown colour.
  
  Oak as a furniture timber was superceded by walnut in the 17th century, and in the 18th century by mahogany,
  
  Semi-fossilised bog oak is black in colour, and is found in peat bogs where the trees have fallen and been preserved from decay by the bog. It is used for jewellery and small carved trinkets.
  
  Pollard oak is taken from an oak that has been regularly pollarded, that is the upper branches have been removed at the top of the trunk, result that new branches would appear, and over time the top would become ball-like. . When harvested and sawn, the timber displays a continuous surface of knotty circles. The timber was scarce and expensive and was used in more expensive pieces of furniture in the Regency and Victorian periods.
• Scallop / Shell Motif - The shell motif has been used in furniture and decorative arts for centuries. In ancient Greece and Rome, shells were often used as decorative elements on furniture and in mosaics. The scallop or cockleshell are the most commonly used. During the Renaissance, the shell motif became popular in furniture and architecture, as the ornate decoration was seen as a symbol of wealth and luxury. In the 18th century, the Rococo style of furniture and decorative arts featured an abundance of shell motifs, and it was used by Thomas Chippendale and as a feature on Queen Anne style cabriole legs. In the 19th century, the shell motif was incorporated into Victorian furniture and decorative items, and often a representation of the the conch shell was inlaid into furniture.
  
  

• Apron - A decorative wooden panel that sits underneath the top surface of a table or chair, and unites the top of the piece with the legs, running at right angles to the underside. On carcase furniture such as a chest or wardrobe, the apron sits below the drawers or doors and attaches to the legs.
  
  On carcase furniture without legs the panel under the drawers or doors sits on the floor and is termed a plinth.
  
  An apron can provide a decorative touch to an otherwise unadorned piece of furniture and at the same time provide structural support and strength. They can be carved or pierced and quite elaborate.
• Pad Foot - In furniture design, a pad foot refers to a type of
  
  furniture foot that is shaped like a flattened ball or pad. It is a common
  
  design element in traditional furniture styles, particularly in English and
  
  American furniture from the 18th and 19th centuries. The pad foot is typically
  
  wider than it is tall, with a broad, flat surface that rests directly on the
  
  floor. It is often carved or turned with decorative details, such as fluting or
  
  ridges, and can be made from a variety of materials, such as wood, metal, or
  
  leather.
  
  
  Pad feet are used to support the legs of various types of
  
  furniture, such as chairs, tables, and cabinets. They are often used in
  
  combination with other types of feet, such as bun feet or bracket feet, to
  
  create a more complex and decorative furniture design. In terms of
  
  functionality, pad feet provide stability and support to furniture pieces, and
  
  can help distribute the weight of the piece evenly across the floor. In terms
  
  of design, they add a classic and traditional look to furniture designs, and
  
  are often used to create a sense of elegance and refinement.

This item has been included into following indexes:

• dressers, age or origin - Georgian 132
• dressers, style or type - low or base only 75
• dressers, timber - oak 154