George Brooke Silver Pair-Cased Pocket Watch, English Circa 1700

A rare silver pair-cased pocket watch, maker George Brooke…
click the photo to enlarge
A rare silver pair-cased pocket watch, maker George Brooke English circa 1700 4.3 cm diameter, 5.2 cm high, case diameter 5.1 cm. A rare silver pair-cased pocket watch, maker George Brooke. English Circa 1700. Silver pair cased watch, both inner and outer cases marked "RB", for Richard Bigge, casemaker of London. The inner case has a stirrup bow and a square hinge for the bezel, and the outer case has a rounded-off hinge. Silver champleve dial, blued steel beetle and poker hands, signed on a cartouche above the. centre "Brooke" and below the centre on a cartouche "London". Gilt edge to the dial outside the. chapter ring. The movement has a verge escapement, fusee and chain drive, Egyptian pillars and ornate. fusee stop. Winged cock with mask at base of table, pierced and engraved with a foliate pattern and centred by a shell, the foot similarly pierced and engraved. Pierced and engraved fret above regulator dial. Signed on the backplate "Geo Brooke London". Reference: Brooke was apprenticed to Robert Crosby in 1671, free of the Clockmakers Company in 1681 and worked until 1701. Provenance: Purchased by Norman Dean from Dr. Burnett in January 1973 for 270 pounds.A lovely little watch, according to Norman. Dimensions: 4.3 cm diameter, 5.2 cm high, case diameter 5.1 cm.

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Fusee - The fusee movement was used in clocks and pocket watches from the mid 17th century. The fusee is a cone shaped drum within the works that is linked to the barrel of the spring, usually by a length of chain.

    As the mainspring loses its tension over time, the cone shaped barrel compensates for this by increasing the tension, by pulling the mainspring tighter, thus ensuring the time remains constant.

    Use of the fusee in clocks was superseded by the "going barrel" in the mid 19th century and for pocket watches at the beginning of the 19th century.

    The fusee continued to be used in marine chronometers until the 1970s.
  • Cartouche - An ornamental panel in the form of of a shield, oval or rectangular scroll with curling edges. It may be carved into the back of a chair or the top of a sideboard, or present on a piece of silver or jewellery, and contain the initials of the original owner, heraldic symbols, or some other inscription, such as the details of a presentation.

    In ceramics the term defines the central area of a vase or similar with a decorative border in one of the shapes above, into which a decorative scene or figures have been painted.
  • Verge Escapement - A verge escapement is an early mechanical escapement used in clocks and other timekeeping devices. It is an early form of the escapement mechanism, which is used to regulate the movement of the hands of a clock or watch. The verge escapement consists of a vertical shaft called the verge, which is mounted on the clock's main plate. Attached to the verge are two pallets, which engage with the teeth of the escape wheel. As the escape wheel turns, the pallets alternately lock and release it, allowing the movement of the clock to be regulated. The verge escapement was widely used in early mechanical clocks, but it was eventually replaced by the more accurate and reliable anchor escapement.
  • Foliate - Decorated with leaves or leaf-like forms.
  • Pair Cased - A pair cased watch is one with a double case. The movement is encased, and for additional protection this is fitted into an outer case.
  • Chapter Ring - A separate metal plate on the face of a clock, on which the numerals for the hours and sometimes parts of the hours, are displayed, usually wheel shaped and sitting on top of the dial plate. The chapter ring is often a feature of the clock and can be silvered or enamelled to stand as a contrast to its background. The hours are usually shown in Roman numerals, although in the late 19th and earlt 20th century, Arabic numerals became fashionable.
  • Movement - The technical name for the workings of a clock or watch, and does not include the dial or case.
  • Circa - A Latin term meaning 'about', often used in the antique trade to give an approximate date for the piece, usually considered to be five years on either side of the circa year. Thus, circa 1900 means the piece was made about 1900, probably between 1895 and 1905. The expression is sometimes abbreviated to c.1900.
  • Bezel - On a clock or watch, the bezel is the metal frame into which the watch or clock glass is fitted. In clocks, the bezel may include a hinge and a flange, in effect a door to the face of the clock. In jewellery the bezel is a band of metal with a projecting lip that holds the gemstone in its setting.
  • Back Plate - On many types of clocks, the movement operates between two plates, usually made of brass, one at the back, and the other at the front, which forms a mount for the dial.

    On English bracket, mantle and table clocks the backplate was often visible through a glass door or panel from the late 17th century, and could be profusely engraved with scrolling decorations, flowers, foliage, birds, and figures. The engraving could also include the maker?s name.

    The amount of engraving reduced and became simpler as the 18th century progressed, and by 1800, had been reduced to a border, often with the maker's name in the centre. By the early 1800s all decoration had ceased, and only the maker's name was added, and by the Victorian era, most bracket, mantle and table clocks had no engraving.

This item has been included into following indexes: