A George II burr walnut chest on chest, circa 1750 the shaped…
click the photo to enlarge
A George II burr walnut chest on chest, circa 1750 the shaped cornice above two short and two long drawers, the lower section with three long drawers, all cross banded, reeded and canted corners, brass handles and escutcheons, on bracket feet 168 cm high, 140 cm wide, 43 cm deep

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Escutcheons - An escutcheon is a plate, made of brass, wood, ivory or ebony, which fits into or over the h keyhole, to protect the edge of the timber keyhole from damage by continual insertions of the key. As a general rule you would expect these escutcheons to be sympathetic in design to the handles of the piece. From the early 19th century escutcheons were sometimes made from ivory, ebony, bone or contrasting wood, often cut in a diamond or shield shape and inlaid into the front. Ivory, in particular, will tend to discolour with age, and certainly should not show up as brilliantly white.
  • Reeding - A series of parallel, raised convex mouldings or bands, in section resembling a series of the letter 'm'. The opposite form of fluting, with which it is sometimes combined. Reeding is commonly found on chair legs, either turned or straight, on the arms and backs of chairs and couches and around table edges in the Neoclassical or Classical Revival manner. Reeding was also used as a form of decoration during the Edwardian period, but it is usually much shallower and evidently machine made.
  • Bracket Feet - On bracket feet the corner edge is square and joined by a mitre to its partner on the opposite angle. The inner edge is usually shaped or scalloped. Bracket feet were first introduced in the early 18th century and used until c. 1830 and are found on carcase furniture such as chests, cabinets, bookcases and bureaux.

    Ogee bracket feet, a variation on straight bracket feet, have the outside edge forming an "S" shaped curve with the top bulging outward and the bottom turning inward.

    On splayed bracket feet, the exterior edge curves outward.
  • Circa - A Latin term meaning 'about', often used in the antique trade to give an approximate date for the piece, usually considered to be five years on either side of the circa year. Thus, circa 1900 means the piece was made about 1900, probably between 1895 and 1905. The expression is sometimes abbreviated to c.1900.
  • Burr - Burr (or in the USA, burl) is the timber from the knotted roots or deformed branch of the tree, which when cut, displays the small circular knots in various gradations of colour. It is always cut into a decorative veneer, most commonly seen as burr walnut on 19th century furniture.
  • Cornice - The upper section of a high piece of furniture such as a bookcase, wardrobe or cabinet that sits immediately on the main structure. The cornice is usually decorated with a variety of architectural mouldings, worked either with a moulding plane or, from the later 19th century, by machine. The front and side of the cornice are mitred together, strengthened by glue blocks, and the back is generally a simple dovetailed rail to hold the structure together. Cornices are generally, though not always, fitted separately to the piece and are held in place either by screws sunk into the top board or by wooden corner blocks. A pediment may sit above the cornice, but sometimes the terms cornice and pediment are used interchangeably.
  • Canted Corners - In decorative arts, especially furniture making, a canted corner refers to a technique where the corner of the piece is angled or "canted" to create a diagonal corner. This is different from a chamfered corner which is a technique where the edges of a corner are cut at an angle, creating a diagonal edge or "bevel" along the corner.

    A canted corner is typically used to add visual interest to the item. It can be found in various styles of furniture such as contemporary, Art Deco, or traditional. It is often used to create a sense of movement and dynamism in a piece.

    Canting a corner is a more complex technique than chamfering, and it is typically done by tilting the corner of a piece of furniture and then cutting the wood to match the angle. It's a technique that requires precise measurements and a good understanding of angles and geometry, and it is usually done by experienced artisans.
  • George Ii - George II (1683 - 1760) was King of Great Britain and Ireland from 1727 until his death in 1760.

This item has been included into following indexes:

Visually similar items

An impressive Victorian flame mahogany scotch chest, a narrow shaped frieze drawer to the top over two hat box and two quarter-size drawers, three full width drawers below, turned barley twist columns to each side, turned wood handles with mother-of-pearl

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A George III oak chest of drawers, English 18th century, with unusual crocketed apron. 99 cm high, 110 cm wide and 57 cm deep. Provenance: Private Collection, Melbourne

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A George III period oak chest on chest, the base with two drawers above two full width drawers, the top section with two drawers above three graduated full width drawers with reeded quarter column mouldings on either side and a dentil frieze beneath the pe

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A marquetry and gilt bronze mounted tall boy, Dutch 19th century, 150 cm high, 100 cm wide, 55 cm deep

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.