A pine Arts & Crafts style table, circa 1930s, the table with…
click the photo to enlarge
A pine Arts & Crafts style table, circa 1930s, the table with an extended top and chamfered edges above a small drawer, the corners with corbel motifs and raised on slightly flaring tapered legs with side stretchers and a partial undertier. Height 72 cm. Length 106 cm. Width 59 cm

You must be a subscriber, and be logged in to view price and dealer details.

Subscribe Now to view actual auction price for this item

When you subscribe, you have the option of setting the currency in which to display prices to $Au, $US, $NZ or Stg.

This item has been sold, and the description, image and price are for reference purposes only.
  • Tapered Legs - found on both cabinet and country-made furniture from the 18th to the later 19th centuries. The leg sometimes terminates in a spade foot, though on most country furniture the taper continues for the whole length of the leg. The important thing to remember is that the taper ought only to be on the inside face of the leg, and the outer face should be straight and square. Some legs were made where both sides tapered, but in such a case the taper ought to be the same on both the inner and outer faces of the leg. Where the inside of a leg is straight, with only the outer face tapering, there is every reason to be suspicious
  • Circa - A Latin term meaning 'about', often used in the antique trade to give an approximate date for the piece, usually considered to be five years on either side of the circa year. Thus, circa 1900 means the piece was made about 1900, probably between 1895 and 1905. The expression is sometimes abbreviated to c.1900.
  • Bevel / Chamfer - In furniture making, a chamfered corner refers to a technique used to create a smooth, angled edge on the corner of a piece of furniture. This is typically done by cutting away a small portion of the corner at an angle, typically 45 degrees, creating a diagonal edge, rather than a sharp 90-degree angle. This technique can be used on various parts of a piece of furniture such as table legs, drawer fronts, or door frames. Chamfering can add visual interest to a piece and can help to soften the overall look of a piece of furniture. It is often used in conjunction with other techniques, such as rounding edges or using contrasting wood species to create a more elegant, sophisticated look. Chamfering is a simple way to add a touch of elegance to a piece of furniture and it is a common technique used by furniture makers.
  • Corbel - An architectural term for a support for a projecting bracket, ostensibly supporting a beam or horizontal feature, but used in bookcases, sideboards and chests as a decorative element. Corbels are often carved with acanthus or other scrolling decoration.

This item has been included into following indexes:

Visually similar items

A European fruitwood side table with tapering square section legs and single drawer. Height 68 cm. Width 81 cm. Depth 57 cm

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A provincial plank top pine refectory table, possibly Australian, 19th century. 73 cm high, 260 cm wide, 91 cm deep

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

A Jacobean style oak occasional table, early 20th century. in light warm tonings, the top with stepped edges and canted corners raised on barley twist legs united by an undertier, and raised on ball form feet. Height 70 cm. Width 68 cm. Depth 46 cm

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.

George III mahogany fold over tea table with small frieze drawer, fluted tapering legs

Sold by in for
You can display prices in $Au, $US, $NZ or Stg.